| View previous topic :: View next topic |
| Author |
Message |
Rigel
Lyran Alliance
Private, 1st Class
Joined: 13-Jul-2004 00:00
Posts: 38
Location: United States
|
 Posted: 15-Jul-2004 21:47 Post subject: Does anybody use LAC's |
  |
|
I have been playing around with some designs of mechs from the 3025 book that maounted ac/5's and putting lac/5's in their place and then converting the left over tonnnage in to either more weapons or armour.
Has any body messed around with this before, and would anybody like to see some of my conversions?
The LAC lackes the range but the weight savings are well worth it in my playing style.
Rigel
_________________
Owner of Rigel Mech Works,
Commander of the Rigel Defense Force
and all around a great guy.
|
|
| Back to top |
  
|
Vagabond
Mercenary
Mr. Referee
Joined: 04-Feb-2002 00:00
Posts: 5791
Location: United States
|
| Posted: 16-Jul-2004 01:48 Post subject: RE: Does anybody use LAC's |
|
|
i have messed around with the idea before. if i recall correctly, lacs like acs can use special ammunition also. if that is true, then mounting an lac is not a bad switch off. even on a 3025 design, a lac is a good weapon. the extra ton or 2 can be used to mount an extra ml, heat sink, or armor. all in all a good trade off IMHO.
_________________
one must work hard to cultivate the mind and body. and one must always cultivate the mind.
//^(^_^)^\\
|
|
| Back to top |
|
Wanallo
Federated Suns
Leftenant Colonel
Joined: 02-Jan-2004 00:00
Posts: 671
Location: United Kingdom
|
| Posted: 16-Jul-2004 08:05 Post subject: RE: Does anybody use LAC's |
|
|
Well i think that the lighter AC's need revamping anyway with either increased damage or lighter wieght. I would use LAC's more often but because they are lvl 3 i tend not to.
I do like them though. Anything to make the AC5 and 2 better is ok in my books. As you can mount a large laser with 3 heat sinks comparable to the wieght of an ac2 plus ammo.
_________________
Constant exposure to dangers will breed contempt for them-Seneca
|
|
| Back to top |
|
-Mud
ex-Jade Falcon
Bounty Hunter
Joined: 04-Nov-2003 00:00
Posts: 1082
|
| Posted: 16-Jul-2004 14:28 Post subject: RE: Does anybody use LAC's |
|
|
The best way to improve the smaller caliber autocannons is to make the AC/2 into an AC/4, and an AC/7 into an AC/7. The AC/7 does almost as much damage as a Large Laser with a lot less heat and better range. Of course, it's considerably heavier than the laser and requires an ammo supply, so things are still balanced. The AC/4 still does comparatively limited damage, but four points is definitely a dent on a light or medium 'mech.
Try using a Jagermech with these rules; the 'mech actually becomes a very dangerous fire support unit.
As for LACs, I'm not really too fond of 'em. I'd rather have a heavier weapon with better range and damage.
|
|
| Back to top |
|
Seraph
Blighted Sun Battalion
2nd Company
"Seraph's Slaughter"
Major
Joined: 11-Mar-2004 00:00
Posts: 1744
|
| Posted: 16-Jul-2004 15:35 Post subject: RE: Does anybody use LAC's |
|
|
Would you have to upgrade the AC/10 then? to a 12? or 15?
_________________
If ignorance is bliss, then why are you so miserable?
|
|
| Back to top |
|
-Mud
ex-Jade Falcon
Bounty Hunter
Joined: 04-Nov-2003 00:00
Posts: 1082
|
| Posted: 16-Jul-2004 17:14 Post subject: RE: Does anybody use LAC's |
|
|
I don't think so personally.
|
|
| Back to top |
|
Wanallo
Federated Suns
Leftenant Colonel
Joined: 02-Jan-2004 00:00
Posts: 671
Location: United Kingdom
|
| Posted: 17-Jul-2004 06:58 Post subject: RE: Does anybody use LAC's |
|
|
No they remain balanced enough, the original AC10 wieghs 12tons, there is roughly 3 tons between each weapon, and at least withg the 4 and 7 damage rules the AC2 and 5 would be worthwhile placing onl ighter mechs.
I likeed my little owens fire support mech with duel UAC2's. It looked good but was absolutley useless. It did a maximum of 8 damage. So it struggled to defeat a stinger, at least with the 4/7 damage its effectively doubled in firepower.
It made me laugh that the AC2, apparently shooting high explosive, armour piercing shells did the same amount of damage as a burst of machine gun fire.
_________________
Constant exposure to dangers will breed contempt for them-Seneca
|
|
| Back to top |
|
Rigel
Lyran Alliance
Private, 1st Class
Joined: 13-Jul-2004 00:00
Posts: 38
Location: United States
|
| Posted: 17-Jul-2004 13:55 Post subject: RE: Does anybody use LAC's |
|
|
Well I have redone all the 3025 mechs with LAC's and it was rather fun I will post some soon as I find the damn floppy for my thinkpad so I can xfer them to the internet computer.
Rigel
I like what i was able to do with the rifleman and jagermech
_________________
Owner of Rigel Mech Works,
Commander of the Rigel Defense Force
and all around a great guy.
|
|
| Back to top |
|
|
|
