|
|
|
Mordel's Bar & Grill |
|
  |
» |
| View previous topic :: View next topic |
| Author |
Message |
Stinger
The Knights of Chaos
General
Joined: 30-Apr-2002 00:00
Posts: 1833
Location: United States
|
 Posted: 31-Oct-2005 15:34 Post subject: My take on what the classic 55 ton tri should have been from 3050 TRO |
  |
|
Was looking at 3 of my favorite looking mechs from the 3050 TRO. So here they are, hope you like them, as always feedback is always appreciated. Now this is how I would have designed them for the 3050 TRO. They would get changes later on. Most of the changes include improvements to armor and firepower. As I believe that if they get an XL the get full to no less than 90% armor coverage.
First up we have the Griffin a Mech that is just screaming for a proper upgrade. I didnt fiddle with much but I did increase the firepower and give it better inclose protection.
BattleMech Technical Readout
Type/Model: Griffin custom GRF-3DS
Tech: Inner Sphere / 3050
Config: Biped BattleMech
Rules: Level 2, Standard design
Mass: 55 tons
Chassis: Earthwerk GRF Endo Steel
Power Plant: 275 Hermes XL Fusion
Walking Speed: 54.0 km/h
Maximum Speed: 86.4 km/h
Jump Jets: 5 Rawlings 55 Standard Jump Jets
Jump Capacity: 150 meters
Armor Type: Starshield A with CASE Standard
Armament:
1 ER PPC
2 Medium Lasers
1 LRM 15
2 Small Lasers
Manufacturer: Defiance Industries, Kallon Weapons Industries, Norse BattleMech Works
Location: Hesperus II (DI), Talon (KWI), Marduk (NBW)
Communications System: Neil 6000
Targeting & Tracking System: Octagon Tartrac System C
------------------------------------------------------------------------------
==Overview:==
An upgrade of the GRF-1DS. The 3DS mounts a ERPPC and LRM 15 combo. Combined
with 2 medium lasers and 2 small lasers of inclose protection. All remaning
tonnage was used to beef up the armor to maximum giving the GRF-3DS a longer
life span on the battlefield.
--------------------------------------------------------
Type/Model: Griffin custom GRF-3DS
Mass: 55 tons
Equipment: Crits Mass
Int. Struct.: 91 pts Endo Steel 14 3.00
(Endo Steel Loc: 3 LA, 2 RA, 1 LT, 4 RT, 2 LL, 2 RL)
Engine: 275 XL Fusion 12 8.00
Walking MP: 5
Running MP: 8
Jumping MP: 5
Heat Sinks: 14 Double [28] 9 4.00
(Heat Sink Loc: 1 LA, 1 RA, 1 LT)
Gyro: 4 3.00
Cockpit, Life Supt., Sensors: 5 3.00
Actuators: L: Sh+UA+LA+H R: Sh+UA+LA+H 16 .00
Armor Factor: 185 pts Standard 0 12.00
Internal Armor
Structure Value
Head: 3 9
Center Torso: 18 27
Center Torso (Rear): 9
L/R Side Torso: 13 20/20
L/R Side Torso (Rear): 6/6
L/R Arm: 9 18/18
L/R Leg: 13 26/26
Weapons and Equipment Loc Heat Ammo Crits Mass
--------------------------------------------------------
1 ER PPC RA 15 3 7.00
2 Medium Lasers LA 6 2 2.00
1 LRM 15 RT 5 16 5 9.00
(Ammo Locations: 2 LT)
1 Small Laser CT 1 1 .50
1 Small Laser HD 1 1 .50
CASE Equipment: LT 1 .50
5 Standard Jump Jets: 5 2.50
(Jump Jet Loc: 2 LT, 2 RT, 1 CT)
--------------------------------------------------------
TOTALS: 28 78 55.00
Crits & Tons Left: 0 .00
Calculated Factors:
Total Cost: 10,418,531 C-Bills
Battle Value: 1,507
Cost per BV: 6,913.42
Weapon Value: 1,472 / 1,472 (Ratio = .98 / .98)
Damage Factors: SRDmg = 21; MRDmg = 15; LRDmg = 8
BattleForce2: MP: 5J, Armor/Structure: 5/2
Damage PB/M/L: 4/3/2, Overheat: 0
Class: MM; Point Value: 15
Next up is my personal favorite the Shadowhawk. I have always loved the look of this mech. Though the weapon systems leaved a lot to be desired.
BattleMech Technical Readout
Type/Model: Shadow Hawk Custom SHD-Z-501-A
Tech: Inner Sphere / 3060
Config: Biped BattleMech
Rules: Level 2, Standard design
Mass: 55 tons
Chassis: Kallon Type VII Endo Steel
Power Plant: 275 CoreTek XL Fusion
Walking Speed: 54.0 km/h
Maximum Speed: 86.4 km/h
Jump Jets: 5 Rawlings 55 Standard Jump Jets
Jump Capacity: 150 meters
Armor Type: Kallon Unity Weave w. CASE Standard
Armament:
4 Medium Lasers
1 PPC
1 Guardian ECM
1 LRM 10
1 Streak SRM 4
Manufacturer: Kallon Industries
Location: Nanking, Talon
Communications System: Neil 6000
Targeting & Tracking System: Garret D2j
------------------------------------------------------------------------------
==Overview:==
Designed as a multi-role 'Mech, the original Shadow Hawk exceeded even
the designers' wildest expectations. Serving all house militaries, including
the Star League army, this medium BattleMech used its impressive array of
firepower with devastating effect. The Shadow Hawk was as adept at serving in
a heavy lance as it is in a recon lance. Given both its track record and
popularity, the push to redesign this venerable BattleMech was only natural.
--------------------------------------------------------
Type/Model: Shadow Hawk Custom SHD-Z-501-A
Mass: 55 tons
Equipment: Crits Mass
Int. Struct.: 91 pts Endo Steel 14 3.00
(Endo Steel Loc: 5 LA, 4 RA, 1 CT, 2 LL, 2 RL)
Engine: 275 XL Fusion 12 8.00
Walking MP: 5
Running MP: 8
Jumping MP: 5
Heat Sinks: 10 Double [20] 0 .00
Gyro: 4 3.00
Cockpit, Life Supt., Sensors: 5 3.00
Actuators: L: Sh+UA+LA+H R: Sh+UA+LA+H 16 .00
Armor Factor: 184 pts Standard 0 11.50
Internal Armor
Structure Value
Head: 3 9
Center Torso: 18 26
Center Torso (Rear): 9
L/R Side Torso: 13 20/20
L/R Side Torso (Rear): 6/6
L/R Arm: 9 18/18
L/R Leg: 13 26/26
Weapons and Equipment Loc Heat Ammo Crits Mass
--------------------------------------------------------
2 Medium Lasers RA 6 2 2.00
2 Medium Lasers LA 6 2 2.00
1 PPC RT 10 3 7.00
1 Guardian ECM RT 0 2 1.50
1 LRM 10 LT 4 24 4 7.00
(Ammo Locations: 2 LT)
1 Streak SRM 4 HD 3 25 2 4.00
(Ammo Locations: 1 LT)
CASE Equipment: LT 1 .50
5 Standard Jump Jets: 5 2.50
(Jump Jet Loc: 2 LT, 2 RT, 1 CT)
--------------------------------------------------------
TOTALS: 29 72 55.00
Crits & Tons Left: 6 .00
Calculated Factors:
Total Cost: 10,724,656 C-Bills
Battle Value: 1,436
Cost per BV: 7,468.42
Weapon Value: 1,323 / 1,261 (Ratio = .92 / .88)
Damage Factors: SRDmg = 21; MRDmg = 12; LRDmg = 5
BattleForce2: MP: 5J, Armor/Structure: 5/2
Damage PB/M/L: 3/3/1, Overheat: 2
Class: MM; Point Value: 14
Specials: ecm
Last is the Wolverine. A mech I have never really spent much time with because I have never liked the weapons load out. Granted this isnt perfect but I like it much more than the original listed in the 3050 TRO.
BattleMech Technical Readout
Type/Model: Wolverine custom WVR-17D
Tech: Inner Sphere / 3050
Config: Biped BattleMech
Rules: Level 2, Standard design
Mass: 55 tons
Chassis: Crucis-A Standard
Power Plant: 275 Nissan XL Fusion
Walking Speed: 54.0 km/h
Maximum Speed: 86.4 km/h
Jump Jets: 5 Northrup 12000 Standard Jump Jets
Jump Capacity: 150 meters
Armor Type: Kallon Unity Weave w. CASE Ferro-Fibrous
Armament:
1 ER PPC
4 Medium Lasers
2 SRM 6s
Manufacturer: Kallon Industries
Location: Nanking
Communications System: Garret T11-b
Targeting & Tracking System: Sync Tracker (39-42071)
------------------------------------------------------------------------------
==Overview:==
The Fourth Succession War gave, and the Fourth Succession War took away.
The Federated Suns captured the Capellan Wolverine factory on Nanking but lost
its own Wolverine factory on Marduk to the Draconis Combine. The larger
Kallon Industries assembly line left House Davion with a net gain and left
House Liao as the only loser. The WVR-7D model emerging from the Nanking
facility represents excellent use of recovered technology.
The weight savings of XL engine technology is put to good use upgrading
weapons, heat sinks, and protection. A General Motors Nova-5 Autocannon
replaces the older Whirlwind model, and a Sutel Precision Line Medium Pulse
Laser takes the place of the Magna model. Designers are adding a heat sink
and using Kallon Unity Weave Ferro-Fibrous Armor. An extra half-ton of armor
and the use of Ferro-Fibrous material improve protection greatly, mostly on
the legs and center torso. Cellular Ammunition Storage Equipment shields the
autocannon shells and missile reloads, and Myomer Acceleration Signal
Circuitry provides emergency speed for sticky situations.
At the Norse BattleMech Works on Marduk, the Draconis Combine is
producing a very different version. It lacks MASC and CASE but makes use of
double heat sinks, eliminating concerns about heat buildup. A Victory
Drumbeat Large Pulse Laser replaces the autocannon, and a Victory Throb Small
Pulse Laser is added. Also added is a second Telos-6 Short-Range Missile
Delivery System. Adding a ton-and-a-half of armor compensates for the lack of
Ferro-Fibrous material.
The Free Worlds League is also nearing production of its own WVR-7M at
Kallon Industries on Thermopolis and Free Worlds Defence Industries on Gibson.
This model is much closer to the original WVR-6R than it is to either the
Davion or Kurita version. It keeps the original armor and lacks CASE. It
also keeps the original twelve heat sinks but uses double-strength ones. The
extra-light engine allows use of MASC and a new weapons configuration. Two
Diverse Optics Sunbeam Extended-Range Large Lasers replace the autocannon, and
two Magna 400P Medium Pulse Lasers replace the single older model.
--------------------------------------------------------
Type/Model: Wolverine custom WVR-17D
Mass: 55 tons
Equipment: Crits Mass
Int. Struct.: 91 pts Standard 0 5.50
Engine: 275 XL Fusion 12 8.00
Walking MP: 5
Running MP: 8
Jumping MP: 5
Heat Sinks: 14 Double [28] 9 4.00
(Heat Sink Loc: 1 LA, 1 RA, 1 RT)
Gyro: 4 3.00
Cockpit, Life Supt., Sensors: 5 3.00
Actuators: L: Sh+UA+LA+H R: Sh+UA+LA+H 16 .00
Armor Factor: 185 pts Ferro-Fibrous 14 10.50
(Armor Crit Loc: 5 LA, 2 RA, 2 LT, 5 RT)
Internal Armor
Structure Value
Head: 3 9
Center Torso: 18 27
Center Torso (Rear): 9
L/R Side Torso: 13 20/20
L/R Side Torso (Rear): 6/6
L/R Arm: 9 18/18
L/R Leg: 13 26/26
Weapons and Equipment Loc Heat Ammo Crits Mass
--------------------------------------------------------
1 ER PPC RA 15 3 7.00
1 Medium Laser RT 3 1 1.00
1 Medium Laser LT 3 1 1.00
2 SRM 6s LT 8 15 5 7.00
(Ammo Locations: 1 LT)
1 Medium Laser CT 3 1 1.00
1 Medium Laser HD 3 1 1.00
CASE Equipment: LT 1 .50
5 Standard Jump Jets: 5 2.50
(Jump Jet Loc: 1 CT, 2 LL, 2 RL)
--------------------------------------------------------
TOTALS: 35 78 55.00
Crits & Tons Left: 0 .00
Calculated Factors:
Total Cost: 10,470,456 C-Bills
Battle Value: 1,461
Cost per BV: 7,166.64
Weapon Value: 1,529 / 1,529 (Ratio = 1.05 / 1.05)
Damage Factors: SRDmg = 31; MRDmg = 10; LRDmg = 4
BattleForce2: MP: 5J, Armor/Structure: 5/2
Damage PB/M/L: 4/3/1, Overheat: 1
Class: MM; Point Value: 15
_________________
Stinger
If it's "creepy" to use the Internet, military satellites, and robot aircraft to find a house full of gorgeous young models so I can drop in on them unexpected, then FINE, I'm "creepy". Howard Wolowitz. BBT.
|
|
| Back to top |
  
|
Karagin
Imperial Karagin Army
Imperial General
Joined: 04-Feb-2002 00:00
Posts: 4120
Location: United States
|
| Posted: 31-Oct-2005 19:01 Post subject: RE: My take on what the classic 55 ton tri should have been from 3050 TRO |
|
|
Nice, but you min maxed them on the weapons.
_________________
Karagin
Only the dead have seen the end of war. - Plato
"Wasted trip Man. Nobody said nuthin' about lockin' horns with no tigers." Oddball
|
|
| Back to top |
|
StarRaven
Federated Suns
Leftenant General
Joined: 01-Jun-2004 00:00
Posts: 1138
Location: United States
|
| Posted: 31-Oct-2005 20:11 Post subject: RE: My take on what the classic 55 ton tri should have been from 3050 TRO |
|
|
Nice ones. They keep the sense of the 'Mech, while upgrading everything.
My only complaint is with the Griffin: I dislike small lasers in place of mediums, and it would likely be better off with one point less armor. You could even use that new half ton for a small laser.
Quote:
|
On 2005-10-31 19:01, Karagin wrote:
Nice, but you min maxed them on the weapons.
|
|
I have a sense for the term "min-max," but I don't see it in these. Could you elaborate, please?
_________________
"Politics is supposed to be the second oldest profession. I have come to realize that it bears a very close semblance to the first."
- Attributed to General Aleksandr Kerensky
|
|
| Back to top |
|
Karagin
Imperial Karagin Army
Imperial General
Joined: 04-Feb-2002 00:00
Posts: 4120
Location: United States
|
| Posted: 31-Oct-2005 22:30 Post subject: RE: My take on what the classic 55 ton tri should have been from 3050 TRO |
|
|
The main weapons, in this case being PPCs give better damage to range then the older model ACs that the mechs had, that alone allows them to gain a huge edge over their older cousins mixing that with the new tech they gain even more.
The damage factors change, where as for example the old model S-Hawk did a mere 19 points of damage and had some heat issues this model has on a quick scan of the weapons an average of 21 points. That is a major improvement over the older models and lends to the min-max of weapons.
Same can be said on the Wolverine which again loses the old AC for oh wait a PPC. Again with the tech to use it and again with the better damage profile then before.
So really why would anyone want to use the 3050 model when these do a lot better by a factor 1.5?
_________________
Karagin
Only the dead have seen the end of war. - Plato
"Wasted trip Man. Nobody said nuthin' about lockin' horns with no tigers." Oddball
|
|
| Back to top |
|
Stinger
The Knights of Chaos
General
Joined: 30-Apr-2002 00:00
Posts: 1833
Location: United States
|
| Posted: 01-Nov-2005 01:06 Post subject: RE: My take on what the classic 55 ton tri should have been from 3050 TRO |
|
|
I tend to go with PPC/ERPPC's simply because I hate ammo. And only really use ammo on secondary weapons, such as SRM's and the occasinal LRM. I think for the tonnage that the AC5, Uac5, and LB5X come in at they are to bulky and to innefficent to be much use. I usually only go with Ac10+ if I use an AC at all. That and being a merc, I tend to shy away from lots of ammo simply because of cost. Though the PPC may cost more initially (200K, 300K for ER) it is less in the long run than any of the AC5 series (125K + 4500 per ton, 250K + 9K for LBX, 200K + 9K for Uac, 275K + 12K for RAC5) because it dosent require ammo. As far as LRM systems go I generally tend to stay away from the 20 rack simply because it is also imo inefficent, the LRM 15 will give you a much better damage spread for a longer duration. The LRM 15 is really the only LRM system that I will use (NOTE: I have used ALL of the LRM systems in my designs, BUT I usually start the design with a LRM 15 rack, if I cant get the desired result with the 15, I will change it to something smaller).
Wasnt even aware of the "min-max" thing till just now. /shrug
[ This Message was edited by: Stinger on 2005-11-01 01:11 ]
_________________
Stinger
If it's "creepy" to use the Internet, military satellites, and robot aircraft to find a house full of gorgeous young models so I can drop in on them unexpected, then FINE, I'm "creepy". Howard Wolowitz. BBT.
|
|
| Back to top |
|
|
|
| |
» |
All times are GMT-04:00 |
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
|
|
|
|
|
